About & Data Sources

Where this project’s space data comes from, and how it is used. The application works fully offline — all datasets are bundled, cached educational constants.

About this project

ꜱᴘᴀᴄᴇ ᴍɪꜱꜱɪᴏɴ ᴅᴇꜱɪɢɴᴇʀ (Design. Plan. Explore.) is an independent educational project developed for the NASA Space Apps Challenge 2026. It teaches space-mission design through transparent, rule-based models: you configure a mission, fly a simplified simulation, and see how every choice — power, propulsion, antennas, instruments — interacts with real physical constraints like distance, sunlight, gravity, and light-time.

Mission outcomes are simplified educational simulations, not professional engineering calculations. Every score and dimension in the app traces to a readable rule, and the destination data shown in the designer, trajectory view, and mission reports comes from the public datasets listed below.

How every value in this app is labelled

Numbers in Space Mission Designer are never left unattributed. Each falls into one of three kinds, and the app tags them in the designer, the reports and the table below.

Reference data

Obtained from the cited public source and shown as published (approximate averages where the source gives averages).

Example: Mars receives ≈ 586 W/m² of sunlight (NASA Planetary Fact Sheet).

Calculated

Computed from reference data with a formula stated next to the value — no new external data.

Example: sunlight at Mars ≈ 43% of Earth’s — computed as 586 ÷ 1,361.

Educational model

A simplified teaching assumption used by this app’s rule-based models. Not a NASA figure and not an engineering rating.

Example: Mission DNA “Power Efficiency” — a teaching score, never a NASA engineering rating.

Data Sources

All data is used for education only. Approximate values; source pages are authoritative. Every link below was checked to load and describe the resource it names. This project is independent and is not endorsed by NASA or ESA.

Planetary Fact Sheet
Reference dataNASA (NSSDCA)

Destination information — distances, gravity, temperatures, moons, orbital periods, solar irradiance (1,361 W/m² at Earth).

https://nssdc.gsfc.nasa.gov/planetary/factsheet/
Solar System Exploration pages
Reference dataNASA

Destination environments and mission context descriptions.

https://science.nasa.gov/solar-system/
Deep Space Network overview
Reference dataNASA / JPL

Communication delay concepts and deep-space communication context.

https://www.nasa.gov/communicating-with-missions/dsn/
Individual mission pages — Voyager, Cassini, Juno, Perseverance, OSIRIS-REx, Dawn, MESSENGER, MarCO, Parker Solar Probe, Europa Clipper, JWST, Hubble
Reference dataNASA / JPL (and partners)

Educational comparisons between your design and real mission architectures.

https://science.nasa.gov/science-missions/
Master Catalog / mission chronology
Reference dataNASA (NSSDCA)

Mission years and highlights used in the Learn page examples.

https://nssdc.gsfc.nasa.gov/nmc/
Small-Body Database Lookup
Reference dataNASA / JPL (SSD)

Asteroid reference figures (size, orbit class, distance from the Sun) on the About page.

https://ssd.jpl.nasa.gov/tools/sbdb_lookup.html
Mission DNA, analysis scores, event probabilities, resource budgets
Educational modelThis project

Rule-based teaching models that turn your configuration into scores, warnings and simulated outcomes. Every rule is readable in-app (Mission Designer → “What do these dimensions mean?”).

Internal teaching model — every rule is readable inside the Mission Designer.

The physics we actually calculate

Only two pieces of physics are computed from reference data. Both are shown with their formula wherever a value appears.

One-way communication light-timeCALC

one-way light time (s) = distance (km) ÷ 299,792.458 km/s

Worked example: Mars ≈ 224.6 million km ÷ 299,792.458 km/s ≈ 749 s ≈ 12.5 minutes one-way. Planets keep moving, so every delay shown is approximate — a range, never an exact figure.

Context: NASA Deep Space Network
Solar intensity (inverse-square law)CALC

sunlight at distance = (1 AU distance ÷ target distance)² × Earth irradiance (1,361 W/m²)

Worked example: Jupiter is ≈ 5.203 AU from the Sun, so intensity falls by 1 ÷ 5.203² ≈ 1/27 → ≈ 3.7% of Earth's — exactly the number your power budget uses to explain why solar panels struggle there.

Irradiance reference: NASA Planetary Fact Sheet

Anything else — Mission DNA, analysis scores, event probabilities, resource budgets — is a simplified educational model built on top of these values. Those models are never presented as NASA data, engineering ratings, or predictions of real mission performance.

How the data is used

Destination facts

10 destinations carry gravity, temperature, atmosphere, radiation, sunlight, and light-time values drawn from the NASA Planetary Fact Sheet.

Communication delay

One-way light-time in Mission Control is computed as distance ÷ speed of light from the fact-sheet distances — transparently labeled in the UI.

Power realism

Solar suitability uses real solar irradiance per destination ("Sunlight here ≈ X% of Earth levels").

Mission context

14 real NASA/ESA mission architectures (Voyager → Europa Clipper) appear on the Learn page for comparison with your design.

Destination dataset (summary)

Compiled from the NASA Planetary Fact Sheet. Values are approximate averages — planets move as they orbit, so ranges, not exact figures, are what matter.

DestinationDistance from Sun (ref)Gravity (m/s²) (ref)Mean temp (°C) (ref)Sunlight vs Earth (calc)One-way light time (calc)
Earth Orbit1 AU9.815100%0.1 s
The Moon1 AU1.62-23100%1.3 s
Mercury0.387 AU3.7167668%≈ 9 min
Venus0.723 AU8.9464191%≈ 8 min
Mars1.524 AU3.71-6543%≈ 13 min
Jupiter5.203 AU23.1-1104%≈ 43 min
Saturn9.537 AU9-1401%≈ 76 min
Uranus19.19 AU8.7-1950%≈ 169 min
Neptune30.07 AU11-2000%≈ 260 min
Asteroid2.7 AU0.28-10514%≈ 18 min
Source: NASA (NSSDCA) Planetary Fact Sheet — reference data

Small-body reference data

Approximate figures for four visited small bodies (reference data, JPL/NASA fact sheets). The in-app asteroid destination uses the same main-belt distances.

Ceres
Dwarf planet (main belt) · ≈ 939 km · 2.77 AU

The largest object in the asteroid belt and the only dwarf planet inside Jupiter’s orbit.

Visited by: NASA Dawn (orbited 2015–2018)

4 Vesta
Protoplanet (main belt) · ≈ 525 km · 2.36 AU

One of the brightest asteroids visible from Earth — it has a differentiated interior like a small planet.

Visited by: NASA Dawn (orbited 2011–2012)

101955 Bennu
Near-Earth (B-type) · ≈ 0.49 km · 1.13 AU

A rubble-pile asteroid whose sample return delivered pristine carbon-rich material to Earth.

Visited by: NASA OSIRIS-REx (sample returned 2023)

433 Eros
Near-Earth (S-type) · ≈ 16.8 km · 1.46 AU

The first asteroid orbited by a spacecraft — an elongated, airless body about 34 km long.

Visited by: NASA NEAR Shoemaker (orbited 2000–2001)

Look up any small body: NASA/JPL Small-Body Database Lookup

Values shown from these datasets are approximate averages compiled for education. Distances between planets change constantly as both planets orbit, so ranges — not exact figures — are shown. Communication delays in the simulation are one-way light-time estimates (distance ÷ speed of light), not exact real-time values.

This is an independent educational project inspired by real space mission concepts. It is not an official NASA website, application, or engineering tool.