What Did You Learn?
Lessons earned from your own missions, followed by the core concepts behind every mission-design decision — grounded in real NASA data and mission history.
Earned from your missions
Core concepts
Every watt a spacecraft uses must be generated somewhere: sunlight, radioactive decay, or a combination.
Clean and scalable, but output falls with the square of distance from the Sun — at Saturn it is roughly 1% of Earth levels, which is why Cassini needed nuclear power and Juno needed basketball-court-sized arrays.
Radioisotope power converts heat from plutonium-238 decay into electricity. It works day and night, near or far, but delivers limited total power and has a finite life.
Solar plus batteries or an RPS unit adds redundancy for eclipses, nights, and dust — at the cost of mass, complexity, and more failure points.
Instruments, heaters, computers, and transmitters all draw from the same finite supply. Duty-cycling instruments is a real operational technique, not a failure.
Real missions to compare with
How did real mission designers solve the same trade-offs you faced? Each entry shows the target, spacecraft class, power, and propulsion choices — and what made the design special.
Used planet alignment for a “Grand Tour”; still returning data over 24 billion km away.
13 years at Saturn; Huygens landed on Titan. Solar power is not viable that far out.
First solar-powered mission to Jupiter — needs arrays the size of a basketball court to collect 4% of Earth-level sunlight.
Nuclear power lets it survive dust storms and long nights; first to make oxygen on another planet (MOXIE).
Fastest launch ever; a flyby architecture was the only affordable way to reach Pluto.
Touched an asteroid and delivered 121.6 g of pristine samples to Earth.
First spacecraft to orbit two extraterrestrial bodies — made possible by ion propulsion efficiency.
Needed six gravity assists and a ceramic sunshade to survive near the Sun.
Its seismometer detected over 1,300 marsquakes — exactly what a seismometer instrument is for.
First CubeSats to deep space; relayed InSight’s landing telemetry in real time.
Fastest human-made object; its cooled solar panels work within 6.9 million km of the Sun.
Huge solar arrays and a metal “radiation vault” protect its ice-penetrating radar and other instruments.
Observes infrared from a stable point 1.5 million km away behind a tennis-court-sized sunshield.
Low Earth orbit gave astronauts the chance to repair and upgrade it five times.
Real mission deep-dives
REFWhy did real designers choose what they chose? Open a documented mission, read the sourced facts, then load a clearly-labelled educational approximation of it into the designer and see what this app’s model does with the same trade-offs.
Voyager 1
NASALaunch 1977 · interstellar mission, still operatingFlyby of Jupiter and Saturn, then the Voyager Interstellar Mission
The clearest documented case of an engineering trade-off over decades: as RTG output falls by roughly 4 W per year, instruments are switched off one by one so the spacecraft can keep returning any data at all.
These are simplified educational reconstructions of documented missions, not digital twins, replicas or simulations of the real spacecraft. Documented facts are labelled and linked to their official source; everything the app computes is labelled as the educational model.
- ObjectiveREF
Close flybys of Jupiter and Saturn, then the extended Voyager Interstellar Mission to characterise the outer heliosphere and interstellar space.
- Mission type (as NASA labels it)REF
Flyby — listed objectives “Jupiter Flyby, Saturn Flyby”.
Documented mission milestones
- 5 Sep 1977
Launched on a Titan IIIE-Centaur from Cape Canaveral.
- 5 Mar 1979
Closest approach to Jupiter.
- 12 Nov 1980
Closest approach to Saturn.
- 1 Jan 1990
Voyager Interstellar Mission begins.
- 16 Dec 2004
Crossed the termination shock into the heliosheath at about 94 AU.
- 25 Aug 2012
Crossed the heliopause into interstellar space at about 122 AU (confirmed later using plasma-wave measurements).
Educational approximation
not a replica of the real spacecraftEducational approximation: outer-planet flyby with RTG power
- ·The app flies one destination with one launch and no gravity assists; Voyager used a planetary alignment to visit Jupiter and Saturn on one trajectory.
- ·The flyby class carries at most four instruments in this app; the real spacecraft carried ten scientific instruments plus radio science.
- ·RTG output decline over decades (~4 W per year), and the instrument shutdowns it forced, are not modelled: the app applies a fixed power class.
- ·Downlink is modelled as a class-based capacity and data rate; the documented 160 bits per second interstellar science rate is not reproduced.
- ·The app’s light-time value comes from the destination’s average distance, so it shows the Jupiter figure, not Voyager’s current >23-hour one-way delay.
Model experiment — change one design choice
The real mission ran on three RTGs. What does this app’s model do to the same flyby if the power system is changed to solar at Jupiter?
Change: Power → Solar Panels — Switching the approximation from RTG to solar power is the fastest way to see why the real spacecraft could not run on sunlight that far out: the model scales solar output with the destination’s real irradiance.
Sources used for this profile
- NASA Science — Voyager 1 mission profile
- NASA Science — Voyager spacecraft
- NASA Science — Voyager frequently asked questions
- NASA Science — Voyager interstellar mission
- NASA Science — Voyager interstellar science
- NASA Science — Where are Voyager 1 and 2 now? (instrument status)
- NASA JPL — NASA turns off two Voyager science instruments to extend mission (5 Mar 2025)
- NASA JPL — NASA’s Voyager 1 resumes sending engineering updates to Earth (22 Apr 2024)
- NASA JPL — Voyager 1 returning science data from all four instruments (13 Jun 2024)
Every documented claim in this profile was checked against these official pages. Where the official pages disagree with each other (for example the date of Cassini’s first Venus flyby), that disagreement is stated rather than resolved silently.
Learning impact check
optional · session-only · no personal dataTen reasoning questions in two parallel sets: five before you experiment and five afterwards, on the same concepts in different situations. Comparing your own two sets shows which trade-offs now feel solid and which are still fragile.
Start with the five before questions — they take about three minutes. You can skip them at any point, and they are remembered only until you reload the page.
Try it yourself: after reading a concept, open the What-If Lab to test a single trade-off on your own mission, fly it many times in the Mission Robustness Lab to see how reliable the design is, or Replay a completed mission with a different decision.
Values shown from these datasets are approximate averages compiled for education. Distances between planets change constantly as both planets orbit, so ranges — not exact figures — are shown. Communication delays in the simulation are one-way light-time estimates (distance ÷ speed of light), not exact real-time values.
Educational content for an independent student project — see Data Sources for the NASA datasets behind these concepts.